Disclosure: Bear in mind that some of the links in this post are affiliate links and if you go through them to make a purchase I will earn a commission. Keep in mind that I link these companies and their products because of their quality and not because of the commission I receive from your purchases.
Jan 152011

Replacing a faulty dishwasher soap cup is done by removing the front panel of the dishwasher.

Start by removing the screws around the inner door liner, gaining access by separating the door will allow access to the soap cup dispenser.

Some models have small screws holding the soap cup to the door, Bosch dishwasher soap cups are held in place with metal locking tabs.

With the screws removed or tabs bent push the soap cup from the door liner. You will need to disconnect the wires that attach to the soap cup and reinstall on the new assembly.

The dishwashers door will need to be installed before you run a test cycle.  If the jet dry indicator will not shut off and the dispenser is full the soap cup assembly will need to be replaced to fix the issue.

 Leave a Reply

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>