Disclosure: Bear in mind that some of the links in this post are affiliate links and if you go through them to make a purchase I will earn a commission. Keep in mind that I link these companies and their products because of their quality and not because of the commission I receive from your purchases.
Mar 092011

Bosch Dishwasher not filling with water can only mean one of several things, more often than not on a Bosch Dishwasher that wont fill or is not filling anymore the water valve will need to be replaced. You can purchase Bosch dishwasher parts by clicking on the link above. We repair Bosch dishwasher everyday of the week if you need technical assistance you can post your DIY Bosch dishwasher repair question in our forums located at the top of this page.

You will need a volt meter and  Torx screw driver bit to test and repair your dishwasher.  Start by removing the lower kick plate usually the kick plate is held on with two screws, with the panel removed you will see the valve on the left a copper fitting will be sticking out over the edge of the plastic.

On both the left and right  there is a Torx screw remove the screw and pull the water valve from the dishwasher. Next remove the two wires that connect to the top of the valve, now the fill hose on the back of the water valve can be pulled off.

Reinstall the new dishwasher valve in the reverse order, this repair will require you to disconnect the appliance before servicing failure to do so can result in electrical shock and even death.


You can purchase your DIY Bosch Dishwasher repair parts at the link above, if you require further assistance please use the forum tab and a factory trained technician will respond.




 Leave a Reply

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>