Disconnect power before attempting any appliance repair!
Fisher Paykel dishwasher are built with half the moving parts of an American built dishwasher. Servicing a Fisher Paykel dishwasher is simple. If you need to remove the control board on your fisher paykel dishwasher watch the video in the link below first. The video explains how to remove the front panel and also the rotor on the dishwasher.
With the front removed, the control board will be located in the top right corner of the cabinet. The board has two prongs on either side that pivot the control in and out of position. The board is held into position with a tab on the side. A flat head screw driver works well to depress the tab releasing the control board. The wires that plug into the side of the control board are also held down with a clip. Use a small flat head to release the wire harness.
For further Fisher Paykel Dishwasher assistance, post your question in our Fisher Paykel dishwasher repair forum. We know Fisher Paykel brand appliances well and can answer just about any repair or review related question you have. Click on the forum link below.