Feb 012011
 

Having several big box appliance dealers in my area there are a flood of Electrolux products in my service area, lucky me.

The missing segments are due to a failed control board. The manufacture has a kit to fix this issue. The kit consists of the a new control board and new wire harness.

Installing the kit takes time, accessing the control panel is done by removing the screws on the side of the panel, you need to slide the oven away from the wall to see the screws.

The harness that connects to the board will come apart if to much pressure is applied, for some reason this connection is tight, the top of the wire harness will lift off in the process, causing a major headache.

Replace the control board to solve the missing number segments. The control’s on these oven are sensitive, using a ground strap in the repair process is not a bad idea.

Disconnect power before attempting any appliance repair, basic electrical skills are a must.

Jan 222011
 

Whirlpool makes their control lock very confusing.

Often times people will look on the control panel and the control lock light will go on and they can not figure out how to unlock the control panel.  They will try pressing and holding the cancel button and unplugging the washer or dryer to reset it.  None of these options work.

All you need to do is press and “hold the end of cycle” button for 3 seconds and the control panel will unlock.

This is a quick DIY repair that you can do on your own if the problem should arise.

 

Whirlpool Washer Appliance Parts: Click Here

Edited: April 14th 2015