Jun 042015
 

Do you have a fault code displayed on your Samsung front load washer? Find your error code in the list below for a detailed explanation on what it means and how to fix it.

Samsung washers are becoming more and more popular. With that popularity means more and more are in the field which means more of them are out their to breakdown. On average roughly 30% of our in home appliance repair calls are on Samsung appliances. We see our fare share so we’re very familiar with their products.

I have complied a list of all the Samsung washer error codes and explained how to fix each one individually. All you need to do is find your error code in the list below and click the link. It will take you to a detailed article that explains what your code means and how to fix it.

It’s taken me a lot of time and research both in the field and on the computer to be able to get this information to you. If you have found any of the information available on my site, please take the time to leave a comment or share the page that was helpful on you social media account. This will help my site grow so more and more folks like you can find the information they need.

Samsung Washer Troubleshooting Self Diagnostics

Samsung Washer Troubleshooting Self Diagnostics

Samsung Washing Machine Error Code List:

Unplug the washer before you attempt any repair.

How To Fix Samsung Washer ND Error Code

How To Fix Samsung Washer LO Error Code

How To Fix Samsung Washer NF Error Code

How To Fix Samsung Washer FL Error Code

How To Fix Samsung Washer LE Error Code

How To Fix Samsung Washer IE Error Code

How To Fix Samsung Washer OE Error Code

How To Fix Samsung Error Code E2

How To Fix Samsung DS Error Code

How To Fix Samsung tE Error Code

How To Fix Samsung 3E Error Code

How To Fix Samsung Hr Error Code

How To Fix Samsung nF1 Error Code

How To Fix Samsung 2E Error Code

How To Fix Samsung SUD Error Code

How To Fix Samsung AE Error Code

How To Fix Samsung SF Error Code 

Still have questions about your Samsung front load washer error code? Use the comment form below to talk to a factory trained appliance repair technician. If you’ve found the information in this post useful, please leave a comment or share the article on your social media account. Sharing the article will help my site gain popularity which in turn leads to more DIY folks finding my site that need appliance repair help.

Thanks,

Matt

 

May 162015
 

Samsung washing machines are gaining in popularity. Now over 30% of our service calls are Samsung Appliances. We see the Samsung washer 2E error code fairly often. We’ve fixed this washing machine error code as well as many others.

You can read below to find out which part is most likely the culprit and what you can try to do to fix it before any washer parts are ordered. If you’re handy, you can make this washer repair yourself without having an appliance repair technician come to your home.

How To Fix Samsung Washer 2E Error Code:

1. Unplug the washer for 2-3 minutes:

Unplugging the washer for several minutes may possibly clear the 2E fault code. If the fault is a glitch or software issue with the control, then unplugging it might just work. It’s a free option so why not try it right? Leave the washer unplugged for several minutes. Ideally 2-3 minutes. Leaving the washer unplugged for several minutes will allow the capacitors on the control board to discharge completely. Once the capacitors have completely discharged the control has been reset.

2. Check wiring connection: 

The error code indicates an issue with the main PCB control board that we know. A loose or shorted wire connection at the main control board could cause this error to be displayed on your machine. Double check each and every connection. If this was my call, I would remove each wire one at a time and plug it back in making sure the connection was tight and secure. If any connection is loose, or shorted, make the necessary repair to the wire connection and test the washer by running a quick cycle.

If trying the above options does not clear the 2E error from the display, the main PCB control board is going to need to be replaced to fix the washer for sure. If you’re handy, you can do this. The repair is more time consuming than difficult.

How To Replace Main Control Board:

The main control board on Samsung front load washing machines is on the back bottom. The main board is in a plastic case. The case is usually yellow in color although some I believe have a white casing? I don’t know for sure that’s what I’ve been told by other appliance repair technicians. The control board case is mounted to the back of the washer with several small Philip head screws. Removing each screw necessary the control assembly will slide over and pop out of the grooves on back.

Once out you can remove the control cover and have access to the plug and play wire system that Samsung uses. The plug and play wires have small tabs on the end. Depress the tab and gently lift up and the wire will come off the connection.

There should be enough wire length to swap each wire over one at a time. If the wires are not long enough, you can take a picture of the wires plugged in. That way you can revert back to the picture to verify proper wiring on the main computer control board. On a normal service call this is a common occurrence. Especially on newer products that I’m not very familiar with. It just ensures the wiring is correct and the job is done right.

Did you find this article or part of it useful? Do you still have questions about your Samsung washer 2E error code? Use the comment form below and I’ll try my best to help you out. Please give me a reasonable amount of time to respond.

Thanks,

Matt

Samsung Washing Machine Error Codes:

Samsung Washer Hr Error Code (Fixed)
Samsung Washer 3E Error Code (Fixed)
Samsung Washer tE Error Code (Fixed)
Samsung Washer ds Error Code (Fixed)
May 102015
 

My Samsung washer is flashing error code OE!?! Several key washing machine components could cause this fault code. You will need to check a couple things to determine if the water valve has failed or the water level sensor.

How To Fix Samsung Washer Error OE:

Will the water shut off when the washer is unplugged? If not, the water valve is bad. The water is the part that mounts on the top back and the hot and cold lines connect to. The water valve is basically a set of solenoids. The plunger inside is activated and water comes out. What happens is over time the solenoid can fail. It can fail where no water comes in and also where water will not stop coming in. If the only way to get the water to shut off is to turn the valve at the wall off, then the water valve is faulty. It’s stuck open and letting water into the washer when it should not be.

The water level sensor is going to be suspect if the water valve is operating correctly. The sensor lets the washer know that enough water has entered the machine and to go ahead and shut down. There’s a small rubber hose that goes from the bottom of the tub to the side of the sensor. That hose from the sensor to the bottom of the tub should be clear. Removing the hose and blowing through it will clear anything inside. If something is inside the hose, take the hose off the bottom and see if the problem is at the hose connection or actually inside the sensor hose. If the sensor hose is clear, the water level sensor will need to be replaced to fix this issue.

If you’re handy, you can make either of these repairs. The water valve is accessed from the top. Once off you will see the plug and play wires and also the rubber hose connections. The wires pull off and the hoses have small hose clamp pliers on them. The water level sensor is also located on the top. It has the small rubber hose connection and also a small plug and play molex connector.

Do you still have a question about the Samsung washer OE error code? I’d be happy to help. You can use the comment form or for immediate assistance use the ASK MATT tab at the top of this page.